Produse pentru magnet din (38)

Flat gripper with a samarium-cobalt magnet in a steel pot. The housing increases the adhesive force of the permanent magnet. The maximum adhesive force is achieved when the entire surface is placed on a metallic surface. The flat gripper has a threaded socket with an internal thread. Design:with threaded bush  Material:SmCo  Force:90 N Diameter:20 mm Height:6 mm Total height:13 mm Diameter threaded bush:8 mm Thread:M4 Weight:16 g Temperature:200 °C Housing:galvanized 

Flat gripper with a neodymium magnet in a steel pot. The housing increases the adhesive force of the permanent magnet. The maximum adhesive force is achieved when the entire surface is placed on a metallic surface. The flat gripper has no hole and is usually glued or pressed in. Design:with threaded bush  Material:NdFeB  Force:60 N Diameter:13 mm Height:4.5 mm Weight:4.5 g Temperature:80 °C Housing:galvanized 

Flat gripper with a neodymium magnet in a steel pot. The housing increases the adhesive force of the permanent magnet. The maximum adhesive force is achieved when the entire surface is placed on a metallic surface. The flat gripper has a 8 mm threaded socket with an internal thread. It is characterized by a force of 140 N. The diameter is 20 mm, the total height of the flat gripper is 15 mm. Design:with threaded bush  Material:NdFeB  Force:140 N Diameter:20 mm Height:7 mm Total height:15 mm Diameter threaded bush:8 mm Thread:M4 Weight:17 g Temperature:80 °C Housing:galvanized 

Flat gripper with a neodymium magnet in a rubber-coated steel pot. The housing increases the adhesive force of the permanent magnet. The maximum adhesive force is achieved when the entire surface is placed on a metallic surface. The flat gripper has a threaded pin with an external thread. Design:with threaded pin  Material:Neodym  Force:180 N Diameter:66 mm Height:8.5 mm Total height:23.5 mm Weight:107 g Thread:M8  Temperature:80 °C Housing:rubber coated 

Rotary solenoids in square design with shafts on both sides and return spring. This preferred type is available in small quantities from stock. Further rotation angle, shaft types or other voltages are available on request. You will find more information in the download area. Design:monostable  Rotation angle:95°  Inital torque:1.8 Ncm End torque:12.7 Ncm Return mechanism:Spring return  Housing type:rectangular  Nominal voltage:24 V Duty cycle:100 % Power consumption:19.2 W Thermal class:B 130 °C  Connection:Leads 20 cm  Dimensions:50 x 50 mm / Length 35 mm  Solenoid weight:570 g Dynamic moment of inertia:4.25 x 10^-6 kg m^2 

Rod gripper with a neodymium magnet in a brass housing. The maximum adhesive force is achieved when the entire surface is placed on a metallic surface. The rod gripper has no thread and is usually glued or pressed in. Design:without thread Material:NdFeB  Force:450 N Height:35 mm Shortened to:7 mm Measure "D":5 mm Weight:132 g Temperature:80 °C Fitting Tolerance:h6 Housing:brass

Rod gripper with a neodymium magnet in a steel housing. The maximum adhesive force is achieved when the entire surface is placed on a metallic surface. The rod gripper has no thread and is usually glued or pressed in. Design:without thread Material:NdFeB  Force:90 N Height:20 mm Shortened to:15 mm Weight:31 g Temperature:80 °C Housing:steel 

Flat gripper with a neodymium magnet in a rubber-coated steel pot. The housing increases the adhesive force of the permanent magnet. The maximum adhesive force is achieved when the entire surface is placed on a metallic surface. The flat gripper has a central internal thread. Design:with threaded pin  Material:Neodym  Force:75 N Diameter:31 mm Height:6 mm Weight:21 g Thread:M5 Temperature:60 °C Housing:rubber coated